Product ID: TV-6
Temp-Vent Foundation Vent System
Series 6 (One Piece Construction)
Description: Help protect your foundation with Temp-Vent.
The foundation is critical to the integrity of the home.
Thatís why foundation ventilation is critical.
Unventilated foundations are subject to built-up moisture that
can eventually lead to costly damage.
Temp Vent foundation vent systems help protect this critical
area of the home. Whatís more, ventilation can help control
conditions that lead to mold, mildew, fungi, damp rot and
A crawl space dehumidier with no drain or power needed!
But thereís more. If thereís one thing termites are
attracted to, itís warm, moist, dead air environments such as
those found under houses in crawl spaces or unfinished
Temp-Vent foundation vents are designed to provide
ventilation that can reduce moisture in these areas, which helps
Whenever possible, vents should be placed on all sides of the
foundation. This will create an intake/exhaust system that
delivers a steady flow of air. One vent should be installed for
each 8 to 10 feet of foundation wall.
Most building codes require 1 square foot of open ventilation
area for every 150 square feet of crawl space. Temp Vent
Automatic Foundation Vents have 50 inches of net free area per
vent. Therefore, you should install one vent for every 50
square feet of crawl space.
For crawl spaces with polyethylene installed, on 80-90% of
the ground, the ventilation requirement changes to 1 square foot
of ventilation for every 500 square feet of crawl space with a
minimum of 4 vents installed to provide cross ventilation. For
crawl spaces with polyethylene, install at least one vent for
every 500 square feet of crawl space.
Automatic Foundation Vents
The non-powered, Automatic Foundation Vent will open and
close automatically using a heat/cold sensitive coil. The
louvers open completely at approximately 72įF and completely
close at approximately 38įF. Unlike manual vents that can waste
energy when no one remembers to open or close them, these vents
self-adjust all year long.
Installation Tips for Automatic Foundation Vents:
- For proper ventilation, one vent
should be installed every 8-10 feet.
- Avoid dead air spaced by placing
vents within 3 feet of each corner.
- A minimum of 4 vents are required to
- Dense shrubbery should be trimmed
for the vents to be effective.
- A heavy duty coil for dependable operation.
- 8"x16" to fit into a standard block opening.
- A net free area of 50 square inches.
- The back of the vent is removable for easy cleaning and
The Series 6 vents are one piece
Click here to see the Series 5 Temp-Vent with removable front
If installing vent in a below grade foundation, a vent well
Click here for vent well information.
TempVents are available through Pest Control
Supply Companies such as: